BG 
EN 
Гама ойл-77 предлага български и немски акумулатори и батерий на марките ISKRA и Tenax на заводски цени!
A high performance fully synthetic heavy duty diesel engine oil designed for use in many Euro 5 engines employing NOx reduction systems. Taurus Extreme M3 10W-40 is formulated for use where there is a requirement to satisfy the latest low emission requirements in Euro V engines and is designed to satisfy the longer drain intervals demanded by the OEM. It is particularly suitable for MTU engines where Type 3 lubricants are required as well as a wide variety of other heavy duty diesel engines ...
A mineral oil based compressor fluid possessing excellent thermal and oxidative stability. It is manufactured using carefully selected mineral oils and inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones, and anti-wear additives protect all the mechanical parts in the compressor. It is designed for a minimum 2000 hour service life assuming excessive temperatures are not encountered.
A premium hydraulic fluid manufactured from highly refined base stocks which possess good oxidation resistance and thermal stability. It is fortified with carefully selected additives to further improve performance characteristics including anti-corrosion to protect the system should water be present, anti-wear to reduce wear in pumps used in hydraulic systems, anti-oxidants and anti-foam. It is suitable for a wide variety of applications including industrial hydraulic systems, commercial, ...
Excelquench L603Z is a new generation, fully accelerated cold quench oil. It is a unique blend of thermally and chemically stable solvent refined base oil fortified with an innovative state-of the-art quench oil additive package. The multi-component additive contains highly effective wetting agents and an accelerator whose function is to reduce the vapour blanket to promote faster quench speeds. Typical applications include high speed steel tools, ball bearings, nuts and bolts and components ...
Ultramax LHM Fluid Plus is a specially formulated mineral oil based hydraulic brake fluid. It is manufactured from a specialised mineral oil and selected additives to produce a hydraulic brake fluid with a very high viscosity index. Ultramax LHM Fluid Plus is recommended for use in certain Citroen, Peugeot and Audi vehicles and in various off-highway hydraulic brake systems. It is suitable for systems using green mineral oil. Never use this fluid in reservoirs painted black and those ...
A specially formulated lubricant for use in limited slip differentials fitted to high performance cars and four wheel drive vehicles. It is manufactured from high quality base oils, top performance extreme pressure additives and specially selected friction modifiers to provide a lubricant with the exacting requirements for limited slip operations.
A premium quality zinc free (ash free) high performance hydraulic oil for use in systems containing silver plated components or where enhanced water tolerance and improved filterability is required. It is manufactured from highly refined base oils which have good oxidation resistance lowering the possibility of gums and lacquers. It is blended using the latest in additive technology which reduces the possibility of deposit formation and ensures rapid water separation. It is recommended for a ...
_270x270.jpg)
Optiguard 15W-40 is a multigrade diesel engine oil manufactured from carefully selected base oils and the very latest additive technology. It meets many engine builder requirements and specifications. It can be confidently supplied for most mixed fleet diesel applications. Superior dispersant additives help maintain engine cleanliness in the latest diesel engines and the latest detergent additives help reduce unwanted deposits in turbochargers and on pistons. Optiguard 15W-40 is suitable ...
A heavy duty mineral oil based gear lubricant for a wide variety of industrial applications. This oil demonstrates superior extreme pressure performance for extended gear life in highly loaded systems and outstanding oxidation stability. Also suitable for use in certain bearing lubrication applications.
Optima 4T SS 10W-40 is a high performance four-stroke motorcycle lubricant formulated with top quality synthetic base stocks and highly refined mineral oil. It incorporates modern additive chemistry which provides maximum engine protection and high levels of component cleanliness. Optima 4T SS 10W-40 possesses outstanding anti-wear characteristics along with high levels of thermal stability and corrosion resistance. Its stay-in-grade properties ensure a highly durable lubricating oil film is ...
Excelcut 432 is a new generation, medium viscosity neat cutting oil and is manufactured from highly refined paraffinic mineral oils making it pale coloured, virtually odourless and highly resistant to oxidation. Excelcut 432 contains very high levels of controlled release sulphur, chlorinated and fatty ester additives for an ultimate surface finish, extended tool life and low chip welding tendencies. It also contains special ant-mist additives for improved visibility of the work piece and ...
Optifarm UTTO is a modern Universal Tractor Transmission Oil for transmissions, hydraulics, final drives and wet brake systems. The very latest agricultural machinery in the modern intensive farming environment needs the protection of a high quality lubricant. Multi-purpose oils are a good compromise but many manufacturers have realised the benefits of using lubricants specifically designed for a given application. Optifarm UTTO is blended from carefully selected base oils and the very ...
An exceptional turbine lubricant oil, manufactured from the highest quality solvent refined mineral base oil fortified with a proprietary turbine oil additive. The state of the art additive system offers outstanding protection against oxidation, gives long-term corrosion protection, and helps retain good oil demulsibility in the presence of water.
A high viscosity index hydraulic fluid with multigrade characteristics. It is manufactured from highly refined base oils which have good oxidation resistance lowering the possibility of gums and lacquers and carefully selected additives and special viscosity index improvers, which offer superior viscosity/temperature characteristics. It is particularly beneficial where extremes of ambient temperatures are encountered.
Excelfluid 2238 has been formulated to cross all performance boundaries. The formulation is based on a unique additive combination working in perfectly balanced synergy to enable neat oil applications such as broaching and gear cutting to be considered for a switch to water soluble technology. It is inherently low foaming and is a perfect choice for use in hard water conditions. Excelfluid 2238 is without doubt a high quality choice of fluid for every difficult application. Excelfluid 2238 ...
A high quality extreme pressure lubricant for highly loaded gearboxes and final drives. Can be used wherever the API GL-5 specification is required. It is suitable for manual gearboxes, including synchromesh, fitted to automotive vehicles, industrial and commercial vehicles. It is manufactured from high quality base oils and high levels of extreme pressure additives to provide a lubricant with outstanding anti wear protection. It is designed to cope with the increasing demands of today.
Excelguard 507 is a solvent deposited water displacing corrosion preventative. Excelguard 507 is a blend of dewatering agents, corrosion inhibitors, hydrocarbon mineral oils, synthetic sulphonates and hydrocarbon solvents. It offers medium to long term protection of ferrous and aluminium alloy components. It leaves a thick oily anti corrosion film when applied. It is ideally suited to inter-process protection after machining.
Autotrans D VI is a premium quality, fully synthetic automatic transmission fluid and is formulated primarily for applications requiring GM Dexron VI, but also covers a multitude of modern vehicle automatic transmission specifications.
A semi fluid lithium soap thickened grease recommended for use in autolube systems and certain enlosed gearboxes. Libra 00 EP grease contains oil soluble EP additives to provide protection against seizure under highly loaded service conditions. The grease also contains additives to inhibit oxidation and rust.
Taurus UHPD 5W-30 is an ultra high performance fully synthetic diesel engine oil designed for extended oil change periods. Taurus UHPD 5W-30 is formulated from synthetic base stocks and approved performance additives which offer excellent thermal stability, low volatility, consistently efficient long life performance and excellent fuel efficiency capabilities. Taurus UHPD 5W-30 is suitable for normally aspirated and turbocharged highly rated diesel engines in trucks, buses, coaches, plant ...
A semi synthetic, fuel-efficient diesel engine oil meeting the latest long drain requirements. Taurus XHPD 10W-40 is the ultimate high performance heavy duty diesel engine oil. It has been formulated from the latest synthetic base stocks and approved additives. The latest emission regulations have demanded more from diesel engine manufacturers. Taurus XHPD 10W-40 has been designed to meet the exacting requirements of certain engines up to and including Euro 5 units. Taurus XHPD 10W-40 is ...
A mineral oil based compressor fluid possessing excellent thermal and oxidative stability. It is manufactured using carefully selected mineral oils and inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones, and anti-wear additives protect all the mechanical parts in the compressor. It is designed for a minimum 2000 hour service life assuming excessive temperatures are not encountered.
A premium hydraulic fluid manufactured from highly refined base stocks which possess good oxidation resistance and thermal stability. It is fortified with carefully selected additives to further improve performance characteristics including anti-corrosion to protect the system should water be present, anti-wear to reduce wear in pumps used in hydraulic systems, anti-oxidants and anti-foam. It is suitable for a wide variety of applications including industrial hydraulic systems, commercial, ...
A general purpose chlorine free soluble oil forming a milky emulsion. It is suitable for a wide range of non-arduous machining operations on both ferrous and non-ferrous materials where a cost effective, general purpose coolant is required. It demonstrates improved sump life over more conventional soluble oils and provides a high degree of machine tool lubrication.
A high quality synthetic brake and clutch fluid with a high boiling point for improved braking performance under arduous conditions. It is manufactured from specialised synthetic components under strict conditions to produce a high quality brake & clutch fluid with a very high maximum operating temperature. Ultramax Brake Fluid DOT 4 is specially formulated for use in the majority of applications in passenger cars and vans, commercial vehicles and off-highway equipment. It meets the ...
Athena Progear FS 75W-90 is a fully synthetic gear oil manufactured from very high quality synthetic base stocks, highly effective extreme pressure and anti-wear additives and premium shear stable viscosity modifiers. Athena Progear FS 75W-90 offers unsurpassed load carrying capacity, which is essential for shock load, high torque and high speed service operation. The high thermal stability of the product’s components allows extended oil drain intervals to be realised and the levels of ...
A premium quality zinc free (ash free) high performance hydraulic oil for use in systems containing silver plated components or where enhanced water tolerance and improved filterability is required. It is manufactured from highly refined base oils which have good oxidation resistance lowering the possibility of gums and lacquers. It is blended using the latest in additive technology which reduces the possibility of deposit formation and ensures rapid water separation. It is recommended for a ...
A highly versatile low SAPS engine oil suitable for use in a wide variety of modern petrol and light duty diesel engines. Recommended for use in Audi, VW, Mercedes-Benz, BMW, Toyota, Nissan where the following specifications are required.
A heavy duty mineral oil based gear lubricant for a wide variety of industrial applications. This oil demonstrates superior extreme pressure performance for extended gear life in highly loaded systems and outstanding oxidation stability. Also suitable for use in certain bearing lubrication applications.
A premium hydraulic fluid manufactured from highly refined base stocks which possess good oxidation resistance and thermal stability. It is fortified with carefully selected additives to further improve performance characteristics including anti-corrosion to protect the system should water be present, anti-wear to reduce wear in pumps used in hydraulic systems, anti-oxidants and anti-foam. It is suitable for a wide variety of applications including industrial hydraulic systems, commercial, ...
Excelcut 427 is a highly refined, new generation medium viscosity neat cutting oil. It is manufactured from highly refined paraffinic mineral oils making it pale coloured, virtually odourless and highly resistant to oxidation. It contains high levels of chlorinated and fatty ester additives for improved surface finish and extended tool life. Excelcut 427 also contains special anti-mist additives for improved visibility of the work piece and healthier environmental aspects. Excelcut 427 is ...
A mineral oil based chainsaw oil with outstanding oxidation resistance and non-fling properties. Specialised additives help reduce wear on chainsaw blades and its excellent oxidation resistance prevents the build up of unwanted deposits.
A high quality machine tool lubricant designed to give optimum performance on slideways and machine beds. Specialised additives eliminate stick-slip problems and component finish is thereby improved. It has been manufactured from carefully selected base oils and anti wear, extreme pressure and anti corrosion additives. Also included are special tacky and lubricity additives which afford good lubricity even at low traverse speeds.
A high viscosity index hydraulic fluid with multigrade characteristics. It is manufactured from highly refined base oils which have good oxidation resistance lowering the possibility of gums and lacquers and carefully selected additives and special viscosity index improvers, which offer superior viscosity/temperature characteristics. It is particularly beneficial where extremes of ambient temperatures are encountered.
Excelfluid Ultra EPDX is the latest in chlorine free technology offering significant advantages in performance without the use of chlorinated additives and is inherently low foaming and hard water stable. It is suitable for use on a wide range of difficult materials and is a perfect choice for aerospace manufacturing. It offers exceptional machining performance and can be used in all types of arduous manufacturing applications including creep feed grinding. The performance additives ...
A heavy duty mineral oil based gear lubricant for a wide variety of industrial applications. This oil demonstrates superior extreme pressure performance for extended gear life in highly loaded systems and outstanding oxidation stability. Also suitable for use in certain bearing lubrication applications.
Excelguard 504 is a solvent deposited water displacing corrosion preventative. Excelguard 504 is a blend of dewatering agents, corrosion inhibitors, hydrocarbon mineral oils, synthetic sulphonates and hydrocarbon solvents. It offers medium to long term protection of ferrous and aluminium alloy components. It leaves a thick oily anti corrosion film when applied. It is ideally suited to inter-process protection after machining.
