A versatile multi-functional automatic transmission fluid suitable for use in a wide variety of automatic gearboxes and power steering units.

A new low SAPS engine oil combining maximum fuel economy savings with outstanding engine protection and after treatment compatibility. Formulated with the requirements of Hondas and Toyotas in mind, Optima LSH 0W-30 is suitable for use in both modern diesel and petrol engines.

Delta Degreaser is a blue coloured, low viscosity solvent cleaner with powerful degreasing properties. It is manufactured from a blend of hydrocarbon solvent and non-ionic emulsifiers, which provide a self-separating emulsion. It can be emulsified with water and may be either rinsed away or wiped off. It is suitable for most degreasing purposes. Delta Degreaser may be applied by brushing, wiping, low-pressure spray or by soaking in a tank. It should then be wiped, allowed to drain or rinsed ...

A heavy duty mineral oil based gear lubricant for a wide variety of industrial applications. This oil demonstrates superior extreme pressure performance for extended gear life in highly loaded systems and outstanding oxidation stability. Also suitable for use in certain bearing lubrication applications.

Excelcut 401 is a highly refined, medium viscosity neat cutting oil. It is manufactured from highly refined paraffinic mineral oils which exhibit excellent oxidation stability and offers an effective lubricating film when fed onto the machining operation. Excelcut 401 is suitable for light to medium machining of ferrous and non-ferrous materials especially free cutting bronzes etc.

A highly advanced long life engine oil with multiple applications. Ideally suited for use in VW PD engines as well as Vauxhall engines requiring the dexos 2 specification. An optimised viscosity grade combining maximum protection with low temperature fluidity. Approved to Ford specification WSS-M2C917-A.

A high quality machine tool lubricant designed to give optimum performance on slideways and machine beds. Specialised additives eliminate stick-slip problems and component finish is thereby improved. It has been manufactured from carefully selected base oils and anti wear, extreme pressure and anti corrosion additives. Also included are special tacky and lubricity additives which afford good lubricity even at low traverse speeds.

A premium quality zinc free (ash free) high performance hydraulic oil for use in systems containing silver plated components or where enhanced water tolerance and improved filterability is required. It is manufactured from highly refined base oils which have good oxidation resistance lowering the possibility of gums and lacquers. It is blended using the latest in additive technology which reduces the possibility of deposit formation and ensures rapid water separation. It is recommended for a ...

A heavy duty power transmission, final drive and hydraulic fluid. It has been formulated using high quality base oils and specialised performance additives to meet the exacting requirements of the Caterpillar T0-4 specification. It offers outstanding oxidation stability and improves the frictional and gear wear levels when compared to previous standards. It is suitable for off highway transmissions, drive trains and hydraulic systems and is recommended for Caterpillar, Komatsu and other off ...

A premium lithium soap thickened high melting point grease, EP treated with good anti-corrosion properties. An excellent multi-purpose grease. For use in anti-friction and plain bearing applications subjected to high load conditions. Libra EP2 is recommended for use in highly loaded industrial and automotive applications such as wheel bearings, pump bearings etc. It is suitable for use in high pressure greasing equipment.

An exceptional turbine lubricant oil, manufactured from the highest quality solvent refined mineral base oil fortified with a proprietary turbine oil additive. The state of the art additive system offers outstanding protection against oxidation, gives long-term corrosion protection, and helps retain good oil demulsibility in the presence of water.

An exceptional turbine lubricant oil, manufactured from the highest quality solvent refined mineral base oil fortified with a proprietary turbine oil additive. The state of the art additive system offers outstanding protection against oxidation, gives long-term corrosion protection, and helps retain good oil demulsibility in the presence of water.

Excelfluid EPX is a water-soluble, semi synthetic, biostable extreme pressure cutting fluid for arduous machining operations on ferrous and non-ferrous materials. Excelfluid EPX is manufactured using good levels of mineral oil, which ensure good machine tool lubrication and corrosion protection. Excelfluid EPX offers improved wetting characteristics which allows for excellent work piece visibility. The boron biostable performance additives offer excellent resistance to bacterial ...

Taurus SHPD E9 10W-30 is the very latest, new generation Super High Performance heavy duty diesel engine oil formulated to meet the latest Euro 5 & 6 low emissions requirements. This advanced lubricant utilises the latest mid SAPS additive technology which helps protect sensitive after-treatment systems found in many modern heavy duty vehicles. The optimised SAE 10W-30 viscosity grade provides significant fuel saving benefits compared with more conventional products. Taurus SHPD E9 10W-30 ...

Optima Vimax 0W-20 is formulated to meet the demands of outstanding engine protection with a fuel-efficient low viscosity. Optima Vimax 0W-20 provides significant fuel saving benefits, exhibits outstanding thermal and oxidative stability and excellent protection against corrosion and black sludge.

Excelguard WD is a solvent deposited water displacing corrosion preventative. It is a blend of dewatering agents, corrosion inhibitors, hydrocarbon mineral oils, waxes, synthetic sulphonates and hydrocarbon solvents. It offers medium term protection of ferrous and aluminium alloy components. It leaves a light film when applied.

A premium hydraulic fluid manufactured from highly refined base stocks which possess good oxidation resistance and thermal stability. It is fortified with carefully selected additives to further improve performance characteristics including anti-corrosion to protect the system should water be present, anti-wear to reduce wear in pumps used in hydraulic systems, anti-oxidants and anti-foam. It is suitable for a wide variety of applications including industrial hydraulic systems, commercial, ...

Excelquench 601 is a specially formulated highly refined paraffinic cold quench oil. It is designed to provide a controlled rate of cooling during the quenching process in order to prevent distortion and is highly resistant to oxidation. It has naturally low volatility and high flash point.

Super Two Stroke is a specially formulated, high performance semi-synthetic two-stroke oil. It utilises the latest additive technology along with a balanced combination of clean burn synthetic and highly refined mineral base oil in order to meet the complex and severe demands laid down by JASO.

A high quality machine tool lubricant designed to give optimum performance on slideways and machine beds. Specialised additives eliminate stick-slip problems and component finish is thereby improved. It has been manufactured from carefully selected base oils and anti wear, extreme pressure and anti corrosion additives. Also included are special tacky and lubricity additives which afford good lubricity even at low traverse speeds.

Opticool Antifreeze Red is an ethylene glycol based engine coolant concentrate, which uses Organic Acid Inhibitor Technology (OAT) and is free from nitrites, amines, phosphates, borates and silicates. It is BTC Classification Type 4E. Fleet trials have shown that when used at the correct concentration coolants based on Organic Acid Inhibitor Technology continue to provide effective corrosion protection for up to 250,000 km for passenger cars and 500,000km in commercial vehicles. It is ...

A heavy duty mineral oil based gear lubricant for a wide variety of industrial applications. This oil demonstrates superior extreme pressure performance for extended gear life in highly loaded systems and outstanding oxidation stability. Also suitable for use in certain bearing lubrication applications.

Autotrans DCT is a fully synthetic multi-vehicle transmission fluid specifically designed for use in dual clutch transmissions. It is a blend of a premium dual clutch additive package with top quality synthetic base oils which combine to produce a lubricant with a wide range of optimised characteristics. These include outstanding frictional durability for improved gear changes over extended periods and excellent load carrying properties for longer transmission life.

A high quality machine tool lubricant designed to give optimum performance on slideways and machine beds. Specialised additives eliminate stick-slip problems and component finish is thereby improved. It has been manufactured from carefully selected base oils and anti wear, extreme pressure and anti corrosion additives. Also included are special tacky and lubricity additives which afford good lubricity even at low traverse speeds.

A premium hydraulic fluid manufactured from highly refined base stocks which possess good oxidation resistance and thermal stability. It is fortified with carefully selected additives to further improve performance characteristics including anti-corrosion to protect the system should water be present, anti-wear to reduce wear in pumps used in hydraulic systems, anti-oxidants and anti-foam. It is suitable for a wide variety of applications including industrial hydraulic systems, commercial, ...

Excelfluid NPX is a biostable milky extreme pressure water-mix fluid. Excelfluid NPX provides the clean working environment and long sump life expected of a modern biostable fluid. These features improve the operator working environment whilst removing the need for post machining cleaning operations.

A new generation multi-vehicle automatic transmission fluid. Features outstanding anti-shudder performance in the latest transmissions coupled with superior oxidation resistance and optimum frictional characteristics. A true state-of-the-art fluid. Autotrans MVA is approved by Voith to the H55.6335 standard.

Optima FE 5W-20 is a fully synthetic engine oil, providing significant fuel saving benefits by virtue of its low viscosity and low friction technology, while maintaining maximum engine protection and component durability. It is formulated for use in Ford 1.0L 3 cylinder EcoBoost petrol engines, using the highest quality synthetic base stocks together with state of the art additive chemistry and is approved to Ford specification WSS-M2C948-B.

Excelguard 1519 is a superior water displacing rust preventative which provides an almost dry-to-touch type film. Excelguard 1519 is manufactured using film forming modifiers, which have particularly good affinity for metal surfaces. Excelguard 1519 also contains state of the art corrosion inhibitors, mineral oil, hydrocarbon fractions and a dewatering solvent. Excelguard 1519 offers medium term protection of ferrous and aluminium alloy components. It leaves an almost dry-to-touch film when ...

A mineral oil based compressor fluid possessing excellent thermal and oxidative stability. It is manufactured using carefully selected mineral oils and inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones, and anti-wear additives protect all the mechanical parts in the compressor. It is designed for a minimum 2000 hour service life assuming excessive temperatures are not encountered.