BG 
EN 
A premium quality zinc free (ash free) high performance hydraulic oil for use in systems containing silver plated components or where enhanced water tolerance and improved filterability is required. It is manufactured from highly refined base oils which have good oxidation resistance lowering the possibility of gums and lacquers. It is blended using the latest in additive technology which reduces the possibility of deposit formation and ensures rapid water separation. It is recommended for a ...
Excelcut EP Liquid is a premium quality liquid cutting lubricant. It is manufactured from very high levels of chlorinated and sulphurised EP additives with promote excellent tool life and improved surface finish. Excelcut EP Liquid is primarily intended for use on medium and high tensile steels. It should be applied directly to the component and tap. It can be readily removed by Delta Degreaser.
Opticool Antifreeze Red is an ethylene glycol based engine coolant concentrate, which uses Organic Acid Inhibitor Technology (OAT) and is free from nitrites, amines, phosphates, borates and silicates. It is BTC Classification Type 4E. Fleet trials have shown that when used at the correct concentration coolants based on Organic Acid Inhibitor Technology continue to provide effective corrosion protection for up to 250,000 km for passenger cars and 500,000km in commercial vehicles. It is ...
A highly advanced long life engine oil with multiple applications. Ideally suited for use in VW PD engines as well as Vauxhall engines requiring the dexos 2 specification. An optimised viscosity grade combining maximum protection with low temperature fluidity. Approved to Ford specification WSS-M2C917-A.
A specially formulated lubricant for use in limited slip differentials fitted to high performance cars and four wheel drive vehicles. It is manufactured from high quality base oils, top performance extreme pressure additives and specially selected friction modifiers to provide a lubricant with the exacting requirements for limited slip operations.
A heavy duty mineral oil based gear lubricant for a wide variety of industrial applications. This oil demonstrates superior extreme pressure performance for extended gear life in highly loaded systems and outstanding oxidation stability. Also suitable for use in certain bearing lubrication applications.
A premium hydraulic fluid manufactured from highly refined base stocks which possess good oxidation resistance and thermal stability. It is fortified with carefully selected additives to further improve performance characteristics including anti-corrosion to protect the system should water be present, anti-wear to reduce wear in pumps used in hydraulic systems, anti-oxidants and anti-foam. It is suitable for a wide variety of applications including industrial hydraulic systems, commercial, ...
A premium quality zinc free (ash free) high performance hydraulic oil for use in systems containing silver plated components or where enhanced water tolerance and improved filterability is required. It is manufactured from highly refined base oils which have good oxidation resistance lowering the possibility of gums and lacquers. It is blended using the latest in additive technology which reduces the possibility of deposit formation and ensures rapid water separation. It is recommended for a ...
Excelcut 401 is a highly refined, medium viscosity neat cutting oil. It is manufactured from highly refined paraffinic mineral oils which exhibit excellent oxidation stability and offers an effective lubricating film when fed onto the machining operation. Excelcut 401 is suitable for light to medium machining of ferrous and non-ferrous materials especially free cutting bronzes etc.
Excelguard WD is a solvent deposited water displacing corrosion preventative. It is a blend of dewatering agents, corrosion inhibitors, hydrocarbon mineral oils, waxes, synthetic sulphonates and hydrocarbon solvents. It offers medium term protection of ferrous and aluminium alloy components. It leaves a light film when applied.
A fully synthetic highly advanced engine oil formulated to cope with the extreme lubrication demands of high performance, high speed petrol and diesel engines. Optima Vimax 5W-40 meets the lubrication requirements of many passenger cars and vans found on the road today.
Athena Progear FS 75W-90 is a fully synthetic gear oil manufactured from very high quality synthetic base stocks, highly effective extreme pressure and anti-wear additives and premium shear stable viscosity modifiers. Athena Progear FS 75W-90 offers unsurpassed load carrying capacity, which is essential for shock load, high torque and high speed service operation. The high thermal stability of the product’s components allows extended oil drain intervals to be realised and the levels of ...
A mineral oil based compressor fluid possessing excellent thermal and oxidative stability. It is manufactured using carefully selected mineral oils and inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones, and anti-wear additives protect all the mechanical parts in the compressor. It is designed for a minimum 2000 hour service life assuming excessive temperatures are not encountered.
A premium hydraulic fluid manufactured from highly refined base stocks which possess good oxidation resistance and thermal stability. It is fortified with carefully selected additives to further improve performance characteristics including anti-corrosion to protect the system should water be present, anti-wear to reduce wear in pumps used in hydraulic systems, anti-oxidants and anti-foam. It is suitable for a wide variety of applications including industrial hydraulic systems, commercial, ...
A premium quality zinc free (ash free) high performance hydraulic oil for use in systems containing silver plated components or where enhanced water tolerance and improved filterability is required. It is manufactured from highly refined base oils which have good oxidation resistance lowering the possibility of gums and lacquers. It is blended using the latest in additive technology which reduces the possibility of deposit formation and ensures rapid water separation. It is recommended for a ...
Excelquench 601 is a specially formulated highly refined paraffinic cold quench oil. It is designed to provide a controlled rate of cooling during the quenching process in order to prevent distortion and is highly resistant to oxidation. It has naturally low volatility and high flash point.
Ultramax LHM Fluid Plus is a specially formulated mineral oil based hydraulic brake fluid. It is manufactured from a specialised mineral oil and selected additives to produce a hydraulic brake fluid with a very high viscosity index. Ultramax LHM Fluid Plus is recommended for use in certain Citroen, Peugeot and Audi vehicles and in various off-highway hydraulic brake systems. It is suitable for systems using green mineral oil. Never use this fluid in reservoirs painted black and those ...
A fully synthetic low SAPS engine oil for the latest Euro 5 and many Euro 6 commercial vehicle engines from manufacturers such as DAF, MAN and Mercedes Benz. Taurus Euro 10W-40 is an ultra high performance diesel engine oil designed specifically to meet the challenge of the most severe lubrication requirements of the latest European and North American heavy duty diesel engines, particularly the low emission Euro 4, Euro 5 and Euro 6 engines running under the extreme demands of significantly ...
Athena Progear SS 75W-90 is a semi synthetic gear oil manufactured from very high quality synthetic and premium mineral base stocks, highly effective extreme pressure and anti-wear additives and shear stable viscosity modifiers. Athena Progear SS 75W-90 offers unsurpassed load carrying capacity, which is essential for shock load, high torque and high speed service operation.The high thermal stability of the product’s components allows extended oil drain intervals to be realised and the ...
A mineral oil based compressor fluid possessing excellent thermal and oxidative stability. It is manufactured using carefully selected mineral oils and inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones, and anti-wear additives protect all the mechanical parts in the compressor. It is designed for a minimum 2000 hour service life assuming excessive temperatures are not encountered.
A premium hydraulic fluid manufactured from highly refined base stocks which possess good oxidation resistance and thermal stability. It is fortified with carefully selected additives to further improve performance characteristics including anti-corrosion to protect the system should water be present, anti-wear to reduce wear in pumps used in hydraulic systems, anti-oxidants and anti-foam. It is suitable for a wide variety of applications including industrial hydraulic systems, commercial, ...
A premium quality zinc free (ash free) high performance hydraulic oil for use in systems containing silver plated components or where enhanced water tolerance and improved filterability is required. It is manufactured from highly refined base oils which have good oxidation resistance lowering the possibility of gums and lacquers. It is blended using the latest in additive technology which reduces the possibility of deposit formation and ensures rapid water separation. It is recommended for a ...
A general purpose chlorine free soluble oil forming a milky emulsion. It is suitable for a wide range of non-arduous machining operations on both ferrous and non-ferrous materials where a cost effective, general purpose coolant is required. It demonstrates improved sump life over more conventional soluble oils and provides a high degree of machine tool lubrication.
A high quality synthetic brake and clutch fluid with a high boiling point for improved braking performance under arduous conditions. It is manufactured from specialised synthetic components under strict conditions to produce a high quality brake & clutch fluid with a very high maximum operating temperature. Ultramax Brake Fluid DOT 4 is specially formulated for use in the majority of applications in passenger cars and vans, commercial vehicles and off-highway equipment. It meets the ...
A specially developed multi-purpose lubricating grease for all anti-friction and plain bearing applications. This grease has exceptional stability performance over a wide, elevated temperature range and can allow longer periods between re-lubrication compared with standard greases. Lithium Complex is recommended for use in highly loaded industrial and automotive applications such as wheel bearings, pump bearings etc. It has been primarily designed as a wheel bearing and chassis ...
A high performance fully synthetic heavy duty diesel engine oil designed for use in many Euro 5 engines employing NOx reduction systems. Taurus Extreme M3 10W-40 is formulated for use where there is a requirement to satisfy the latest low emission requirements in Euro V engines and is designed to satisfy the longer drain intervals demanded by the OEM. It is particularly suitable for MTU engines where Type 3 lubricants are required as well as a wide variety of other heavy duty diesel engines ...
A versatile multi-functional automatic transmission fluid suitable for use in a wide variety of automatic gearboxes and power steering units.
A mineral oil based compressor fluid possessing excellent thermal and oxidative stability. It is manufactured using carefully selected mineral oils and inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones, and anti-wear additives protect all the mechanical parts in the compressor. It is designed for a minimum 2000 hour service life assuming excessive temperatures are not encountered.
A premium hydraulic fluid manufactured from highly refined base stocks which possess good oxidation resistance and thermal stability. It is fortified with carefully selected additives to further improve performance characteristics including anti-corrosion to protect the system should water be present, anti-wear to reduce wear in pumps used in hydraulic systems, anti-oxidants and anti-foam. It is suitable for a wide variety of applications including industrial hydraulic systems, commercial, ...
A new low SAPS engine oil combining maximum fuel economy savings with outstanding engine protection and after treatment compatibility. Formulated with the requirements of Hondas and Toyotas in mind, Optima LSH 0W-30 is suitable for use in both modern diesel and petrol engines.
Excelquench 604 is a specially formulated highly refined paraffinic cold quench oil. It is designed to provide a controlled rate of cooling during the quenching process in order to prevent distortion and is highly resistant to oxidation. It has naturally low volatility and high flash point.
A heavy duty traffic film remover comprising of a concentrated blend of detergents, alkaline salts and chelating agents in water. Suitable for all types of vehicle washing where ultimate cleaning power is required. This product is particularly recommended for heavy duty degreasing and MOT type work.
_270x270.jpg)
A semi synthetic fuel efficient multi-grade engine oil for use in a broad range of passenger cars and vans. It incorporates high quality synthetic and mineral base stocks combined with advanced polymer and inhibitor technology to create a highly durable, stay-in-grade modern engine oil.
A semi synthetic, fuel-efficient diesel engine oil meeting the latest long drain requirements. Taurus XHPD 10W-40 is the ultimate high performance heavy duty diesel engine oil. It has been formulated from the latest synthetic base stocks and approved additives. The latest emission regulations have demanded more from diesel engine manufacturers. Taurus XHPD 10W-40 has been designed to meet the exacting requirements of certain engines up to and including Euro 5 units. Taurus XHPD 10W-40 is ...
A very high quality automatic transmission fluid formulated from high purity synthetic and solvent refined base oil and specially selected high technology additives to provide the correct frictional qualities demanded by modern automatic transmissions.
A mineral oil based compressor fluid possessing excellent thermal and oxidative stability. It is manufactured using carefully selected mineral oils and inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones, and anti-wear additives protect all the mechanical parts in the compressor. It is designed for a minimum 2000 hour service life assuming excessive temperatures are not encountered.
A premium hydraulic fluid manufactured from highly refined base stocks which possess good oxidation resistance and thermal stability. It is fortified with carefully selected additives to further improve performance characteristics including anti-corrosion to protect the system should water be present, anti-wear to reduce wear in pumps used in hydraulic systems, anti-oxidants and anti-foam. It is suitable for a wide variety of applications including industrial hydraulic systems, commercial, ...
Optima Vimax 0W-20 is formulated to meet the demands of outstanding engine protection with a fuel-efficient low viscosity. Optima Vimax 0W-20 provides significant fuel saving benefits, exhibits outstanding thermal and oxidative stability and excellent protection against corrosion and black sludge.
Excelquench L603Z is a new generation, fully accelerated cold quench oil. It is a unique blend of thermally and chemically stable solvent refined base oil fortified with an innovative state-of the-art quench oil additive package. The multi-component additive contains highly effective wetting agents and an accelerator whose function is to reduce the vapour blanket to promote faster quench speeds. Typical applications include high speed steel tools, ball bearings, nuts and bolts and components ...
